Archives for : September2015

Reinventing the Steering Wheel

  • With the addition of many tech and convenience features, the all-new Ford Mustang steering wheel is now the most advanced in pony car history
  • The all-new Mustang steering wheel is the most advanced ever – the addition of new technical features follow a long line of innovations
  • Mustang steering wheel has undergone many styling changes since its debut in 1964

When Mustang first debuted in 1964 it singlehandedly defined the Pony Car segment and has been setting the standard for design ever since. It has influenced trends in every aspect of vehicle styling including the steering wheel. The all-new Mustang carries on that leadership trend. From bare aluminum and resin, to Alcantara-wrapped with drive-mode and steering-effort control, Ford is reinventing the wheel.

 

1964: The first-generation Mustang was a worldwide sensation. An original design America couldn’t get enough of, it established the classic long nose, tight cabin, abrupt trunk proportion stance, which has become Mustang’s signature look. The Mustang interior had its own appeal, with a twin cockpit layout and what would become an iconic steering wheel with three bare-aluminum spokes and a simulated wood rim with a center horn ring. The wheel’s large 16-inch diameter allowed for easy turning, as power steering was optional equipment.

1967: As Mustang matured, new features were added to make it more functional and more convenient for enthusiast buyers. A tilt-away wheel with seven adjustments was available. This allowed drivers to choose the steering position that fit their preference, while also improving vehicle entry and exit without sacrificing looks or practicality. A new faster ratio (20.3:1) power steering system became available in 1967, making turn-in quicker for a sportier feel.

1968: Safety became a priority, and a collapsible steering column was added to Mustang to aid in reducing the possibility of injury in a crash. To bolster this feature, the redesigned two-spoke steering wheel featured a larger, cushioned center section. The center hub horn control was replaced with the small, metal half-circle on the bottom half.

1974: With the launch of the all-new second-generation Mustang II, design took a new, contemporary direction. The three-spoke wheel was replaced with a leather-wrapped two-spoke wheel. Mustang II introduced available power rack-and-pinion steering – allowing cars equipped with that feature to have a smaller 15-inch wheel as opposed to the standard 16-inch one.

1979: With introduction of the much-loved Fox Body Mustang, more European design language was adopted inside and out. The two-spoke wheel from Mustang II was replaced with a four-spoke wheel, which was later shared with other Ford products. Wiper and light controls moved to a steering column stalk. The Fox Mustang steering wheel was a harbinger, incorporating vehicle controls for the first time. Cruise control was offered on manual transmission-equipped cars, with the feature controlled by buttons on the steering wheel.

1984: Mustang was developed into a high-performance variant with the legendary Special Vehicle Operations Mustang. In addition to the high-output turbocharged four-cylinder engine, SVO Mustang’s performance upgrades included an aggressive tilting three-spoke steering wheel featuring a thicker rim and smaller outside diameter for a sportier look and feel. The Ford logo and “SVO” are embossed into the leather on the center of the wheel.

1990: Mustang received its first airbag as standard equipment. Because the airbag was located in the center of the steering wheel, the horn was moved from the center to two spoke-mounted buttons, easily accessible by the natural position of the driver’s thumbs. Cruise control buttons were also placed in a more ergonomic position.

1994: The launch of the fourth-generation Mustang included a nod to the original 1964 pony car, with a twin cockpit layout and sculpted modern styling for the steering wheel and airbag. Various buttons became easier to use, while allowing for the driver to keep eyes on the road and hands on the wheel. Horn buttons were replaced with a hinged airbag cover, acting as horn control at the wheel’s center.

2005: Based on the 1965-1967 Mustang design, this three-spoke wheel appeared on the fifth-generation Mustang. This wheel was available with standard urethane spokes, or optional aluminum spokes with the interior upgrade package. Unlike the steering wheels it was based on, this rim came wrapped in leather.

2010: Many buttons were added for SYNC voice control technology, including volume, phone, audio input selections and track/station selectors. The center badge changed from over-molded acrylic to high-quality spun aluminum with a polished aluminum horse, or snake in the case of Shelby GT500. Aluminum spokes hooking into the leather mimicked design elements of the center stack to impart a universal theme throughout the cabin. Contrast stitching in the steering wheel was available with the interior upgrade package.

2013: In further refinement of the Mustang steering wheel as the in-car tech control center, the wheel was revised to include a four-way control button, plus an “OK” button for instrument cluster screen control. Boss 302 and Shelby GT500 Mustangs got a race-inspired Alcantara-wrapped steering wheel.

2015: A totally redesigned steering wheel for the all-new 50th anniversary Mustang incorporates more controls than ever. Up to 20 buttons can be found on the wheel of the sixth-generation pony car, controlling everything from adaptive cruise control to SYNC functionality. Buttons on the right side of the wheel control SYNC and the radio, while buttons on the left deal with the driving controls and gauge cluster screen. Paddle shifters are available with automatic transmission-equipped Mustang for the first time – mounted on the rear of the steering wheel. The circle airbag in this wheel had to be specially designed to keep with Mustang heritage, as it’s the only steering wheel in Ford’s lineup with a circle airbag. It is also the company’s smallest diameter wheel, at just 14 inches. The aluminum spokes are trimmed back from the rim so the driver’s hands only touch leather when holding the wheel.

GT350: The Shelby GT350 and GT350R Mustangs represent the most track-capable street-legal Mustangs to date, and feature a race-inspired flat-bottom steering wheel with additional driver controls. Shelby drivers can make myriad adjustments to the car without taking their hands from the wheel. Wheel-adjustable features include electric power steering effort, MagneRide suspension settings, advanced drive mode selections and exhaust tuning. As with race car steering wheels, the rim is wrapped in Alcantara, and GT350R includes a stripe on the center at the top, which is designed to let the driver know when the wheel is at true center. For Shelby Cobra, the logo appears on the center of the wheel – the only place inside the car where the logo can be found. Spokes are finished in a darker hue than on Mustang GT – complementing the aggressive nature of Shelby Mustang.

Ian Callum Inducted into Scottish Motoring Hall of Fame

  • Ian Callum joins Scottish Motoring Hall of Fame
  • Inaugural year also honours Sir Jackie Stewart and Jim Clark
  • Presented by Association of Scottish Motoring Writers

JAGUAR DESIGN TEAM AT JAGUAR HQ IN COVENTRY 10/7/14

Jaguar Director of Design Ian Callum has been named among the first inductees to the Scottish Motoring Hall of Fame at a prestigious ceremony held aboard the Royal Yacht Britannia and hosted by His Royal Highness Prince Michael of Kent.

The Association of Scottish Motoring Writers’ Scottish Motoring Hall of Fame, presented by Bridge of Weir Leather Company, was inaugurated as part of the opening celebrations of the Concours of Elegance, which opens at the Palace of Holyroodhouse in Edinburgh this weekend. Ian Callum joins motorsport legends Sir Jackie Stewart and Jim Clark as the first inductees.

Ian Callum said: “It’s a great honour, made even greater by the company I am in as an inaugural member of the Scottish Motoring Hall of Fame alongside Sir Jackie Stewart and Jim Clark. I am absolutely thrilled, and so proud.”

Ian Callum, 61, was born in Dumfries, Scotland, and became Jaguar’s Director of Design in 1999, following a series of high profile design roles in the automotive industry.

Aged 14, Callum penned his first attempt at a Jaguar car design, and sent it to the company in the hope of landing a job. He went on to study industrial design and graduated from the Glasgow School of Art, and subsequently from the Royal College of Art in London with a postgraduate Masters degree in vehicle design.

President of the Association of Scottish Motoring Writers, Alisdair Suttie, commenting on his presentation to Ian Callum, said: “There is a very strong contingent of Scots in the world automotive sector, in both racing and industry, some of whom have been absolutely fundamental in putting Scotland on the map when it comes to globally significant achievements on wheels. These are the people that the Scottish Motoring Hall of Fame was created to celebrate, and Ian Callum, was right up there at the top of our list of such individuals. From his early design work, through to the Jaguars we know and love today – XK, XJ, XF, C-X75, XE, F-TYPE, F-PACE – his creations are heralded as pieces of automotive art the world over. I am very proud to induct Ian into the Scottish Motoring Hall of Fame.”